Home/Gigabyte Servers

Gigabyte R262-ZA2 Server

The 14-bay Gigabyte R262-ZA2 server can be configured with 256GB 3DS RDIMMs or 3DS LRDIMMs to fill all 16x memory module slots for a total of up to 4TB of memory. When standard RDIMMs or LRDIMMs are installed, half of this amount is available. This machine is powered by a single, AMD EPYC processor with 8 to 64 cores from either the 7001, 7002, or 7003 series, depending on the system revision. Up to 2x double-slot GPU cards can be mounted on this chassis.
Configure
Gigabyte R262-ZA2 side view.
Intel Partner Gold AMD Executive Elite System Builder
Configure

Gigabyte R262-ZA2 Server - System Overview

Description

Ideal for all things AI plus use as a networking server, this platform delivers 4x 3.5" NVMe/SATA/SAS and 8x 3.5" SATA/SAS hot-swappable HDD/SSD bays on the front panel, plus 2x 2.5" SATA/SAS hot-swappable HDD/SSD bays on the rear. Under the hood, there is a single M.2 slot with a PCIe Gen4 x4 interface that can be used to boot the OS or for more storage. The platform also supports 2x 1Gb/s LAN ports, 1x OCP 3.0 Gen4 x16 mezzanine slot, and 5x full-height, full-length PCIe 4.0 slots and a single PCIe 3.0 slot. There are two alternative AMD EPYC series processor and memory configurations for the R262-ZA2 server.

Gigabyte R262-ZA2 Server (rev. 100):
  • AMD EPYC 7001/7002 series processor family

Gigabyte R262-ZA2 Server (rev. A00):
  • AMD EPYC 7002/7003 series processor family
  • 3DS RDIMM/LRDIMM modules up to 256GB supported

Gigabyte R262-ZA2 OCP 3.0 Gigabyte R262-ZA2 drive cage

Gigabyte R262-ZA2 Server - Specifications

Processor - 1 Socket

  • (rev. 100) AMD EPYC 7001 or 7002 series processor family
  • (rev. A00) AMD EPYC 7002 or 7003 series processor family
  • Single processor, 7nm technology
  • Up to 64-core, 128 threads per processor
  • cTDP up to 240W

    • Chipset:

  • System on Chip

Motherboard

  • MZA2-CE0

Memory

    Memory Slots

  • 16x DDR4 DIMM slots
  • 8-Channel memory architecture

    • Memory Type

  • RDIMM
  • LRDIMM
  • 3DS RDIMM
  • 3DS LRDIMM

    • Memory Speed

  • Up to 3200/2933 MHz

    • DIMM Module Sizes Rev.100

  • RDIMM/LRDIMM: Up to 128GB

    • Rev.A00
  • RDIMM/LRDIMM: Up to 128GB
  • 3DS RDIMM/3DS LRDIMM: Up to 256GB

Drive Bays

    Front Side:

  • 4 x 3.5" NVMe/SATA/SAS hot-swappable HDD/SSD trays
  • 8 x 3.5" SATA/SAS hot-swappable HDD/SSD trays, enabled by optional SAS Card

    • Rear Side:

  • 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
  • SAS card is required to enable the drives

    • Recommended 12Gb/s SAS Cards:

  • CRA4448
  • CRA3338

LAN

  • 2 x 1GbE LAN ports (1 x Intel® I350-AM2)
  • 1 x 10/100/1000 management LAN

    • Video

  • Integrated in Aspeed AST2500
  • 2D Video Graphic Adapter with PCIe bus interface
  • 1920x1200 @ 60Hz 32bpp

Input / Output

    Internal

  • 1 x M.2 slots
  • 1 x USB 3.0 header
  • 1 x OCP 3.0 mezzanine slot
  • 1 x OCP 2.0 mezzanine slot
  • 1 x TPM header
  • 1 x COM header
  • 1 x Front panel header
  • 1 x HDD Backplane board header
  • 1 x IPMB connector
  • 1 x PMBus connector
  • 1 x Clear CMOS jumper
  • 1 x BIOS recovery jumper

    • Front

  • 2 x USB 3.0
  • 1 x Power button with LED
  • 1 x ID button with LED
  • 1 x NMI button
  • 2 x LAN activity LEDs
  • 1 x System Status LED
  • 1 x Reset button
  • 1 x HDD activity LED

    • Rear

  • 2 x USB 3.0
  • 1 x VGA
  • 2 x RJ45
  • 1 x MLAN
  • 1 x ID button with LED

    • Backplane I/O

  • Front side_CBP20C5: 12 x NVMe/SATA/SAS ports
  • Rear side_CBP2022: 2 x SATA/SAS ports

    • TPM

  • 1 x TPM header with SPI interface
  • Optional TPM 2.0 kit: CTM010

Expansion Slots

    Supports up to 2 x double slot GPU cards
  • Maximum limitation of GPU card: 296mm (L) x 111.5mm (W) x 39.5mm (H)

    • Riser Card CRS2027:
  • 2 x PCIe x8 (Gen4 x8) low-profile slots

    • Riser Card CRS2225 x 2:
  • 2 x PCIe x16 (Gen4 x16 or x8) FHHL slots
  • 2 x PCIe x8 (Gen4 x0 or x8) FHHL slots
  • 1 x PCIe x16 (Gen4 x16) FHHL slot
  • 1 x PCIe x16 (Gen3 x16 or x8) FHHL slot, shared with OCP2.0 mezzanine slot

    • Internal Riser Card CRS101H:
  • 1 x PCIe x16 (Gen4 x16) FHHL slot, occupied by CNV3134, 4-ports NVMe Card

    • 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth
    1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with CRS2225
    1 x M.2 slot:
  • M-key
  • PCIe Gen4 x4
  • Supports NGFF-2280/22110 cards

Chassis

    Enclosure

    Height: 87.5mm (3.44 in)

    Width: 438mm (17.24 in)

    Depth: 730mm (28.74 in)

Power Supply

  • 2 x 1600W 80 PLUS Platinum redundant PSUs

System Fans

  • 4 x 80x80x38mm (16,300rpm), 2-ball

System Management

  • Aspeed AST2500 management controller
  • GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Gigabyte R262-ZA2 Server - Documentation

Gigabyte R262-ZA2 Server User Manual Gigabyte R262-ZA2 Server Data Sheet Gigabyte Memory Population Guidelines AMD EPYC 7003 Series CPU Gigabyte GSM Server Installation and Configuration Guide Gigabyte GSM Agent Installation and Features Guide Gigabyte Redfish API Specification User Guide Gigabyte Server Management Console User Guide

Your server. Your specs.

Choose components, get instant pricing, and build the perfect server in minutes.
Fast, simple, and completely transparent!

Open Configurator
Consult
the Experts! Talk to one of our trained professionals to create a system to your exact specifications.
Contact Us