Product Details:
HPE PROLIANT DL360 G10 RACK 2.5 INCH SFF 8 BAY HPHD HPPS 1U SERVER CHASSIS ( GEN10 ) - ( 8B IS STANDARD - 10B OPTIONAL VIA 2SFF CAGE BAY / PCIE NVME COMPATIBLE )
MANUFACTURER: HP
PART NUMBER: HP DL360 G10 2.5 8B
NOTE: THIS MODEL IS A 2.5 INCH SFF 8 BAY SAS / SATA STANDARD OPTION ONLY ( UP TO 10 BAY SAS, SATA, OR NVME COMPATIBLE - CHECK FOR AVAILABILITY ). IF YOU DESIRE A 3.5 INCH LFF ( UP TO 4 BAY SAS / SATA ), PLEASE CONSULT YOUR IT CREATIONS REPRESENTATIVE FOR AVAILABILITY. OPTION DOES NOT INCLUDE ANY PROCESSORS, MEMORY, STORAGE OR POWER SUPPLIES - PLEASE CONSULT YOUR IT CREATIONS REPRESENTATIVE FOR CUSTOMIZE CONFIGURATIONS
PROCESSOR SUPPORT
MAX NUMBER PROCESSOR CONFIGURATION: UP TO ( 2 ) TWO CPUs
PROCESSOR SOCKET TYPE: FCLGA3647 ( SOCKET P )
PROCESSOR COMPATIBILITY: 2ND GEN INTEL XEON SCALABLE PROCESSOR FAMILY ( CASCADE LAKE ) / 1ST GEN INTEL XEON SCALABLE PROCESSOR FAMILY ( SKYLAKE )
PROCESSOR CORE COUNT: UP TO 28 CORES PER SOCKET
PROCESSOR TDP: UP TO 205W
NOTE:
- PLEASE CONSULT YOUR IT CREATIONS REPRESENTATIVE FOR AVAILABLE OPTIONS
MEMORY SUPPORT
MEMORY SUPPORTED: UP TO ( 24 ) TWENTY FOUR DIMM SLOTS ( 12 DIMMs PER PROCESSOR )
LRDIMM MEMORY SIZE CAPACITY: UP TO 3TB
RDIMM MEMORY SIZE CAPACITY: UP TO 1.54TB
HPE PERSISTENT MEMORY SIZE CAPACITY: UP TO 6TB
NVDIMM MEMORY SIZE CAPACITY: UP TO 192GB
MEMORY SPEEDS: DDR4-2933MHZ ( SPEEDS MAY VARY BASED ON PROCESSOR MODEL AND/OR RAM TYPE )
NUMBER OF CHANNELS: 6 CHANNELS PER PROCESSOR ( 2 DIMMS PER CHANNEL )
NOTE:
- HPE PERSISTENT MEMORY ARE ONLY SUPPORTED WITH 2ND GEN INTEL XEON SCALABLE FAMILY
- NVDIMMs ONLY SUPPORTED WITH 1ST GEN INTEL XEON SCALABLE FAMILY AND CAN ONLY BE MIXED WITH RDIMMs
- MIXING OF LRDIMMs AND RDIMMs ARE NOT SUPPORTED
- MEMORY CAPACITY AND SPEEDS MAY VARY, BASED ON PROCESSOR MODEL
- PLEASE CONSULT YOUR IT CREATIONS REPRESENTATIVE FOR AVAILABLE OPTIONS
STORAGE SUPPORT
HARD DRIVE SUPPORT: UP TO ( 10 ) TEN 2.5 INCH SFF HOT PLUG HARD DRIVES ( 8 BAY SAS / SATA IS STANDARD )
STORAGE TYPE: HDD / SDD
STORAGE PROTOCOL: SAS / SATA / PCIE NVME
MAX STORAGE SIZE: UP TO 26.4TB HDD OR 168.3TB SSD
ADDITIONAL STORAGE SUPPORT: ( 1 ) ONE REAR BAY BACKPLANE ASSEMBLY ( VIA RISER SLOT1 ) OR ( 2 ) TWO M.2 INTERFACES ( VIA OPTIONAL PRIMARY RISER BOARD ) OR ( 4 ) FOUR M.2 INTERFACES ( VIA DUAL DRIVE ENABLEMENT KIT )
NOTE:
- 8+2 STORAGE CONFIGURATIONS ALSO AVAILABLE
- REAR BAY BACKPLANE ASSEMBLY IS OPTIONAL
- OPTIONAL BAYS MUST BE INSTALLED TO REACH MAXIMUM CAPACITY STORAGE
- REAR BAY STORAGE INSTALLATION WILL AFFECT EXPANSION SLOTS CAPABILITIES
- ( 2 ) TWO M.2 INTERFACES VIA PRIMARY RISER BOARD IS OPTIONAL
- ( 4 ) FOUR M.2 INTERFACES VIA DUAL DRIVE ENABLEMENT KIT IS OPTIONAL
- PLEASE CONSULT YOUR IT CREATIONS REPRESENTATIVE FOR AVAILABLE OPTIONS
EXPANSION SLOT SUPPORT
NUMBER OF PCI SLOTS SUPPORT: UP TO ( 3 ) THREE PCI-E SLOTS ( 1 ) ONE MEZZANINE SLOT
PCI INTERFACE TYPE: PCI-E 3.0 - INTERFACES VARY
- 1X16 FH, 3/4 LENGTH + 1X8 HH PRIMARY GPU RISER ( STANDARD )
- 2X16 SATA M.2 RISER ( PRIMARY OPTIONAL )
- 1X16 + 1X8 NVME RISER ( PRIMARY OPTIONAL )
- 1X16 HH OR FH, 3/4 LENGTH SLOT3 RISER ( SECONDARY OPTIONAL )
- MEZZANINE SLOT ( MEZZANINE EXPANSION OPTIONAL )
NOTE:
- SLOT3 RISER REQUIRES THE 2ND PROCESSOR CONFIGURATION
- IF SECONDARY RISER FULL HEIGHT KIT IS INSTALLED, PRIMARY RISER SLOT2 CAN NOT BE POPULATED
- REAR BAY STORAGE INSTALLATION WILL AFFECT EXPANSION SLOTS CAPABILITIES
- PLEASE CONSULT YOUR IT CREATIONS REPRESENTATIVE FOR AVAILABLE OPTIONS
POWER SUPPORT
NUMBER OF POWER SUPPLIES SUPPORT: UP TO ( 2 ) TWO SLOTS
POWER TYPES IN WATTAGE: 500W / 800W / 1600W
OPERATING SYSTEMS AND VIRTUALIZATION SOFTWARE SUPPORTED
2ND GEN INTEL XEON SCALABLE PROCESSOR FAMILY:
- MICROSOFT WINDOWS SERVER 2012 R2: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT WINDOWS SERVER 2016: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT WINDOWS SERVER 2019: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT WINDOWS SERVER 2022: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT HYPER-V SERVER: 2012 R2, 2016, 2019
- VMWARE VSPHERE: 6.0 U3, 6.5 U2 THROUGH U3 AND 6.7 U1 THROUGH U3, 7.0
- CLEAROS: 7.6; CLEARVM: 2.0
- RED HAT ENTERPRISE LINUX ( RHEL ): 7.6 WITH KBASE, 8.0
- SUSE LINUX ENTERPRISE SERVER ( SLES ): 12 SP3, 15 - INCLUDES XEN )
- UBUNTU: 1804 LTS ( 4.15.0 )
- ORACLE LINUX: 7.6 UEK RELEASE 5 UPDATED 2; ORACLE VM 3.4.6 ( UEK RELEASE 4 UPDATE 7 )
- CITRIX HYPERVISOR: 8.0, 8.1, 8.2; XENSERVER 7.1, 7.4, 7.5, 7.6
NOTE:
- SLES12 SP4 IS MINIMUM FOR SERVER FEATURING INTEL OPTANE DC PERSISTENT MEMORY
1ST GEN INTEL XEON SCALABLE PROCESSOR FAMILY:
- MICROSOFT WINDOWS SERVER 2012 R2: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT WINDOWS SERVER 2016: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT WINDOWS SERVER 2019: ESSENTIALS, STANDARD, DATACENTER
- MICROSOFT HYPER-V SERVER: 2012 R2 / 2016 / 2019
- VMWARE VSPHERE: 6.0 U3, 6.5 THROUGH U3 AND 6.7 THROUGH U3, 7.0
- CLEAROS: 7.6; CLEARVM 2.0
- RED HAT ENTERPRISE LINUX ( RHEL ): 6.9 AND 7.3
- SUSE LINUX ENTERPRISE SERVER ( SLES ): 11 SP4, 12 SP2, 15 ( INCLUDES XEN )
- UBUNTU: 16.04.3 HWE ( 4.10 ), 18.04 LTS ( 4.15.0 )
- ORACLE LINUX: ORACLE LINUX / UEK 6.9, 7.4; ORACLE VM 3.4.4
- CITRIX HYPERVISOR: 8.0, 8.1, 8.2; XENSERVER 7.1, 7.4, 7.5, 7.6
- CLEAROS
- CENTOS
PLEASE BE ADVISED:
THE OPTIONS ABOVE ARE BASED ON HPE QUICKSPECS DOCUMENTATION DATED SEPTEMBER 2022 - INFORMATION MAY CHANGE
