Custom configured, quickly delivered!
Your shopping cart is empty Shopping Cart
Buy Online or Call 800-237-0402

Dell PowerEdge M830 Blade Server - System Overview


Dell's PowerEdge M830 supports up to 48 DIMMS of DDR4 memory when powered by a maximum of four Xeon processors. It’s designed for compute-intensive workloads, highly virtualized environments, and mission-critical database applications.


The M830 supports 83% more processing cores than the previous generation M820 using Intel's Xeon E5-4600 v4 processors. Xeon E5-4600 v3 processors are also supported but offer less cores than the v4 processors. Administrators can start out with two or four processors.


In a four processor configuration the M830 will support 48 DIMMs total of DDR4 memory offering a 28% gain in performance over DDR3 memory modules. Each processor supports 12 memory modules. Administrators can start out with just two processors and 24 DIMMs and easily scale to support more memory by adding additional processors. A maximum of 3TB of memory is available with four processors running 64GB memory modules supporting transfer speeds of up to 2400MT/s.


Data-intensive workloads are no match for the M830 which supports either 12 2.5-inch SSDs or up to 25 2.5-inch HDDs for up to 72TB of storage capacity. Supported drive types include SAS and SATA SSDs and HDDs. There's also support for a maximum of two 2.5-inch PCIe SSDs. HD storage is handled by the integrated S130 software RAID controller or your choice of optional PERC RAID controllers featuring the full range of RAID options. An optional internal Dual SD Module offers redundant hypervisor supporting a mirrored configuration with two cards or it can be used with a single card but without redundancy.


The M830 is a compute blade that is installed in a blade enclosure, and as such cooling, networking, and power are handled at the chassis level. For I/O intensive workloads the system supports 24 10GbE ports connected to three redundant low-latency fabrics. Video is supported by a Matrox G200 module supported on the iDRAC8 sharing 12MB application memory.


Blades can be managed individually or collectively using Dell’s Chassis Management Controller (CMC) in more than one chassis, and more than one location on your network. Agent-free management of the blade is provided by iDRAC8 which resides on the system board of the M830 and provides real-time management of the server and internal storage devices. OpenManage with Lifestyle Controller helps Administrators deploy, update, and support automation on demand, improving efficiency and automatically updating inventory.


Blade systems offer flexibility, reliability, and efficiency with a smaller hardware footprint and a lower total cost of ownership with shared power, cooling, and management features. The M830 Blade is designed to meet growing IT demands with a scalable architecture and rapid access to additional storage in the form of NAS and SAN. Dell's M830 is a great addition to your M1000e enclosure of shared infrastructure VRTX offering generous memory and storage with four-processor performance. This is an ideal platform for extreme virtualization and database applications that require low-latency and high-throughput.

Shop Now

Dell PowerEdge M830 Blade Server - Specifications

Processor - 4 Socket
    Intel® Xeon® processor E5-4600 v4 product family
    2 x Intel QuickPath Interconnect (QPI): 6.4 GT/s, 8.0 GT/s, 9.6 GT/s

  • 2.5MB per core
  • Core options: 6, 10, 12, 14, 16, 18, 22
Operating System (Dell recommends Windows 10 Pro)
  • Microsoft® Windows Server® 2008 R2
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2012 R2
  • Novell® SUSE® Linux Enterprise Server
  • Red Hat® Enterprise Linux
  • VMware® ESX®
  • Optional hypervisors:

  • Citrix® XenServer®
  • VMware vSphere® ESXi
    Intel C610 series chipset
    Up to 3TB
    Up to 2400 MT/s DDR4 memory
    48 DIMM slots: 4GB/8GB/16GB/32GB/64GB
Embedded Hypervisor (Optional)
    VMware vSphere® ESXi™ using redundant internal SD cards dedicated for hypervisor
    Hot-plug hard drive options:

  • PowerEdge Express Flash NVMe PCIe SSD
Drive Bays
  • 12 x 1.8” SSD
  • 4 x 2.5” SATA HDD/SSD
  • 4 x 2.5” SAS HDD/SSD
  • 2 x 2.5” PCIe SSD and 2 x 2.5” SATA HDD/SSD
  • 2 x 2.5” PCIe SSD and 2 x 2.5” SAS HDD/SSD
I/O Mezzanine Card Options
  • Broadcom® 5719 quad-port 1Gb NIC
  • Broadcom 5720 dual-port 1Gb NIC
  • Broadcom 57810 dual-port 10Gb DA/SFP+ CNA
  • Broadcom 57810 dual-port 10Gb Base-T network adapter
  • Intel Ethernet I350 dual-port 1Gb server adapter
  • Intel Ethernet I350 quad-port 1Gb server adapter
  • Intel Ethernet X540 dual-port 10GBASE-T server adapter
  • Mellanox® ConnectX®-3 dual-port 10Gb Direct Attach/SFP+ server network adapter
  • Mellanox ConnectX-3 dual-port 40Gb Direct Attach/QSFP server network adapter
  • Emulex® LPE 12000, single-port 8Gb Fibre Channel HBA
  • Emulex LPE 12002, dual-port 8Gb Fibre Channel HBA
  • Emulex LPe16000B, single-port 16Gb Fibre Channel HBA
  • Emulex LPe16002B, dual-port 16Gb Fibre Channel HBA
  • Emulex OneConnect OCe14102-U1-D 2-port PCIe 10GbE CNA
  • Emulex OneConnect OCe14102-U1-D 2-port PCIe 10GbE CNA
  • QLogic® 2560, single-port 8Gb Optical Fibre Channel HBA
  • QLogic 2562, dual-port 8Gb Optical Fibre Channel HBA
  • Qlogic 2660, single-port 16GB, Fibre Channel HBA, full height
  • Qlogic 2662, dual-port 16GB, Fibre Channel HBA, full height
RAID Controller
  • PERC S130 (SW RAID)
  • PERC H330
  • PERC H730
  • PERC H730P
    Two Dell Select Network Adapters using:

  • Broadcom 5720 1Gb Quad Port KR Blade Network Daughter Card
  • QLogic 57840S 10Gb Quad Port KR Blade Network Daughter Card
  • QLogic 57810S-k Dual port 10Gb KR Blade Network Daughter Card
  • Emulex OneConnect OCm14102-U4-D, Dual Port 10GbE, KR CNA Network Daughter Card
  • Emulex dual-port 10GB KR Blade Network Daughter Card
  • Intel i350 Quad Port 1 Gigabit, KR Blade Network Daughter Card
  • Intel x520-k dual-port 10Gb KR Blade Network Daughter Card
    Chassis level – PowerEdge M1000e 2700W Platinum and 3000W Titanium PSU options
Graphics Card
    Video type Matrox® G200 (integrated with iDRAC8)
    Video memory: 16MB shared with iDRAC8 application memory
    Full-height blade with up to 8 nodes in a M1000e chassis; up to 2 nodes in VRTX converged infrastructure
    Height: 15.2 inch (197.92 mm)
    Width: 2 inch (50.35 mm)
    Depth: 19.2 inch (564.9 mm)
    Systems management:

  • IPMI 2.0 compliant
  • Dell OpenManage Essentials
  • Dell OpenManage Mobile
  • Dell OpenManage Power Center
  • Remote management:

  • iDRAC8 with Lifecycle Controller
  • iDRAC8 Express (default)
  • iDRAC8 Enterprise (upgrade)
  • 8GB vFlash media (upgrade)
  • 16GB vFlash media (upgrade)
  • Dell OpenManage Integrations:

  • Dell OpenManage Integration Suite for Microsoft® System Center
  • Dell OpenManage Integration for VMware® vCenter™
  • Dell OpenManage Connections:

  • HP Operations Manager
  • IBM Tivoli® Netcool® and CA Network and Systems Management
  • Dell OpenManage Plug-in for Oracle® Database Manager

Shop Now

Get a quote for Dell PowerEdge M830 Blade Server

If you know what you want but can't find the exact configuration you're looking for, have one of our knowledgeable sales staff contact you. Give us a list of the components you would like to incorporate into the system, and the quantities, if more than one. We will get back to you immediately with an official quote.